SFI 18.1 Harmonic Balancers by Engine & Balance
Every damper on this page states the same line in its own listing: SFI 18.1 — the SFI Foundation specification for crankshaft harmonic dampers. That is the whole membership rule. This page sorts 24 in-stock SFI 18.1 dampers from Professional Products, Pro/Race, ATI Performance, PRW, Trick Flow, Rollmaster, Top Street Performance, Ford Performance’s shelf neighbours and Fluidampr, from $159.99 to $643.31, engine family first, because a damper only fits the engine family and balance it was built for. Every diameter, balance, material and finish below comes from that damper’s own listing, and where a listing contradicts itself, this page flags it instead of smoothing it over. Every order over $200 ships free.
OUR SFI 18.1 DAMPER PICKS
| Product | Spec (from the product listing) | Price | Why it is here |
|---|---|---|---|
| SBM 7.3 Harmonic Damper - SFI | PowerForce Plus, 7.300 in OD, SFI 18.1, steel, black, internal balance, Small Block Mopar (per listing) | $159.99 | The floor of this page: the cheapest damper here whose own listing states SFI 18.1, for a small-block Mopar. Its listing also carries the words External next to the construction line — read the flag note below before ordering. |
| SBC 6-3/4 Harmonic Damper - SFI | PowerForce Plus, 6.750 in OD, SFI 18.1, steel, black, internal balance, Small Block Chevy (per listing) | $176.99 | The small-block Chevy staple: the mid-size 6.750 in diameter in steel, internal balance, at the price most SBC builds start at. |
| Damper - SBF 289-351W 28oz External Balance | Track Max, 6.610 in OD, SFI 18.1, steel, black paint, 28 oz external balance, Small Block Ford 289-351W (per listing) | $271.83 | The small-block Ford pick that names its balance weight in its title: 28 oz external, the figure early 289/302/351W rotating assemblies are balanced to — and the page’s clearest lesson that balance is not a detail. |
| BBC 7in Harmonic Damper SFI | Super Damper, 7.074 in OD, SFI 18.1, steel, black oxide, internal balance, Big Block Chevy (per listing) | $370.29 | The big-block Chevy pick from ATI’s Super Damper line, and one of the deepest-stocked dampers on this page. |
| 7in Dia Harmonic Damper Ford 5.0L Coyote SFI | SFI 18.1, aluminum, silver anodized, internal balance, Ford Coyote (per listing; its title states 7 in diameter) | $643.31 | The ceiling of this page: Fluidampr’s damper for the Ford 5.0L Coyote, in aluminum — the modern-engine end of a shelf that starts with a $159.99 Mopar steel damper. |
SMALL BLOCK CHEVY: FIVE DIAMETERS, ALL INTERNAL BALANCE
Five SBC dampers, and every one is listed as internal balance — the small-block’s standard arrangement, stated plainly so nobody cross-shops them against an externally balanced 400 build. Smallest and lightest: the 6 in Lightweight, steel, black ($163.99). The mid-size pair: the 6.750 in PowerForce Plus, steel ($176.99) and Pro/Race’s 6.61 in Pro Sport, iron, natural finish ($206.99) — same job, two constructions, steel against iron. Largest here: the 8 in PowerForce Plus, steel ($205.99). At the top sits ATI’s Super Damper, 6.325 in OD, steel, black oxide ($320.91) — the deepest-stocked damper on this page. Questions before you order? Call 213-549-4279 (Mon-Fri, 9am-5pm PT) and we will read the listing with you.
BIG BLOCK CHEVY: EXTERNAL AND INTERNAL, SIDE BY SIDE
The big-block shelf is where balance stops being a footnote: two of these three are external balance and one is internal, and they do not interchange. Pro/Race’s 7.0 in Pro Sport, iron, external balance ($211.59) and the 8 in PowerForce Plus, steel, external balance ($224.99) serve externally balanced assemblies; ATI’s Super Damper, 7.074 in OD, steel, black oxide, internal balance ($370.29) serves internal-balance builds. Match the damper to how your rotating assembly was balanced — if you do not know, ask your machine shop before ordering, not after.
GM LS: FOUR DAMPERS, 6.325 TO 7.520 IN
Four LS dampers, all listed internal balance. Professional Products’ LS1/LS6 damper, 7.500 in OD, steel ($252.99); Pro/Race’s 7.520 in Pro Sport, iron, natural ($265.26); Top Street Performance’s 6.325 in, steel, black paint ($296.28) — the small-diameter LS option here; and ATI’s LS3 Serpentine Super Damper, 7.480 in OD, aluminum / steel ($486.99), the deepest-stocked LS damper on the page. LS applications split by car and accessory drive, so confirm your exact application in the maker’s guide — the listings here are stated for the LS-Series generally, not for one named car, and this page does not narrow them further than the listings do.
SMALL BLOCK FORD: 28 OZ, 50 OZ, AND ONE INTERNAL-BALANCE OUTLIER
Small-block Ford is the balance trap in person: the same engine family takes different dampers depending on the year and the rotating assembly, and this shelf holds all three answers. 28 oz external: the 6.400 in PowerForce Plus, steel ($220.99) and Trick Flow’s Track Max, 6.610 in OD, steel, for 289-351W ($271.83). 50 oz external: Pro/Race’s 6.61 in Pro Sport, iron ($232.99). Internal balance: Rollmaster’s Red Series 4-bolt, 6.200 in OD, steel, clear powder coat ($302.81) — for internally balanced aftermarket assemblies, and its 4-bolt pulley mounting is in its title. A 28 oz damper on a 50 oz assembly (or the reverse) is a vibration problem you installed yourself: check the balance your crank was built to before choosing.
MOPAR, BIG BLOCK FORD, OLDSMOBILE — AND TWO FLAGS
Mopar: the Small Block Mopar 7.300 in OD PowerForce Plus, steel ($159.99), the B / RB-Series damper, steel, internal balance ($176.99), and Trick Flow’s Track Max for BBM 383-440, 7.010 in OD, steel, internal balance ($286.34), whose listing also names the 426 Hemi. Big Block Ford: the 6.700 in PowerForce Plus, steel, internal balance ($229.99). Oldsmobile V8: the 6.500 in PowerForce Plus, steel, external balance ($218.99) — the page’s one Olds damper, labelled external exactly as listed. Two honesty flags: the small-block Mopar damper’s listing carries the words “External / Steel” in its construction line and “Internal Balance” right after — both are printed there, they point in opposite directions, and we flag it rather than pick one for you; confirm with the maker before ordering that one. And the B/RB damper is titled 7.25 while its own spec line states 7.300 in OD — the spec line is what is printed in the table above.
FORD MODULAR, COYOTE, AND THE DURAMAX
The modern shelf: Professional Products’ Ford Modular 4.6L damper, 6.800 in OD, steel, internal balance ($168.99); Fluidampr’s Ford 5.0L Coyote damper, aluminum, silver anodized, internal balance ($643.31), titled at 7 in diameter; and the page’s one diesel damper, PRW’s SFI Elite Series for the 2011-17 Duramax 6.6 LML, 8.375 in OD, steel, external balance ($499.95) — the largest diameter here, and the only damper on the page whose listing names exact model years, so the other Duramax generations in the wider range are a separate check, not an assumption.
AN HONEST NOTE ON WHAT IS NOT ON THIS PAGE
The parent Harmonic Balancers range holds 461 products, and most of them are not on this page. Excluded: every damper whose listing states Non-SFI (the wider range carries a full Non-SFI shelf from the same makers — same engines, lower price, no SFI 18.1 line, and none is dressed up as rated here); dampers whose listings say only “SFI” without the 18.1 specification, which were left out rather than assumed; ATI shell assemblies and balancer shells (components of ATI’s modular Super Damper system — a shell is not a complete damper, and none is listed here as one); the wider range’s many near-duplicate ATI listings for the same engine at different groove and ring configurations, of which one representative per engine family was kept so each application appears once; and all balancer bolts, pullers, covers, counterweights and repair sleeves, which live in their own collections. Also named plainly: no damper on this page publishes a weight, an RPM limit, or a recertification interval in its listing, so none of those figures is printed here.
QUESTIONS BUYERS ASK US
What does SFI 18.1 mean? It is the SFI Foundation’s specification 18.1, for crankshaft harmonic dampers — the construction and containment standard racing sanctioning bodies point to when they require an approved damper. Every damper on this page states “SFI 18.1” in its own listing; that statement is the membership rule, and dampers whose listings state Non-SFI, or SFI with no number, are not on the page. Whether your class requires it is your rulebook’s call — this page’s job is only to make sure the dampers shown actually carry the line.
Internal or external balance — how do I know which I need? It is decided by your rotating assembly, not by preference. Internally balanced assemblies carry their balance weight inside the crank; externally balanced ones rely on weighted dampers and flexplates/flywheels to complete the balance — which is why the small-block Ford shelf above splits into 28 oz and 50 oz external dampers plus one internal-balance unit. If the engine was balanced by a machine shop, its balance card says which; if it is a stock assembly, match the damper to the assembly the factory built. When a listing’s own words conflict — one damper here is flagged for exactly that — confirm with the maker before ordering.
Does damper diameter matter? The listings here run from 6.000 in-class small dampers to the Duramax’s 8.375 in OD, and diameter is part of the application, not a styling choice: it has to suit the engine family, the crank snout and the accessory drive in front of it. This page prints each damper’s OD exactly as its listing states it — including one case where the title and the spec line disagree (7.25 in the title, 7.300 in in the spec), which is flagged on the page rather than hidden. Measure and confirm against the maker’s application guide if your build is not the standard configuration.
Is it a balancer or a damper? Both names are used for the same part — the listings on this page use Harmonic Balancer, Harmonic Damper and Crankshaft Damper interchangeably, and the parent collection is called Harmonic Balancers. The part’s job is to absorb the crankshaft’s torsional vibration; “balancer” survives in the name because externally balanced versions also carry balance weight. Shop by engine family and balance, not by which noun the maker chose.
Steel or iron? Both appear here, stated per listing: most Professional Products, Trick Flow, Rollmaster, PRW and ATI dampers are listed as steel, the Pro/Race Pro Sport line is listed as iron, and the Coyote Fluidampr is listed as aluminum. The listings state the material without ranking it, and this page does the same — pick by the application and balance first, and treat construction as the maker’s design choice for that damper.
Will this damper fit my exact year and model? The listings here are stated by engine family (Small Block Chevy, GM LS-Series, Mopar B / RB-Series and so on), and most direct you to the manufacturer’s application guide for the specific vehicle — only the Duramax damper names exact years (2011-17 LML) in its listing. Read your damper’s product page, check the maker’s guide for your year and accessory drive, and call us at 213-549-4279 if the two do not line up — we would rather check than ship the wrong damper.
Shopping the wider range? Browse the full Harmonic Balancers collection, read our guides on the News & Builds blog, or see the page that came before this one: Drag Wheels by Bolt Pattern + Backspacing.