Drag Wheels by Bolt Pattern + Backspacing
A drag wheel is bought in a strict order: bolt pattern first (the wheel has to bolt to your hubs at all), backspacing second (it decides where the tire sits in the wheelwell), and width and diameter last. This page sorts 24 in-stock complete drag wheels from WELD Racing, Forgestar, Billet Specialties and Race Star, from $245.48 to $906.19, exactly that way - front runners, classic 15 in rears, billet wheels, then the modern 17 and 18 in drag-pack sizes. Every diameter, width, backspace, bolt pattern, material and finish below comes from that wheel’s own listing, and where a listing states nothing, this page says so instead of filling it in. Every order over $200 ships free.
OUR DRAG WHEEL PICKS
| Product | Spec (from the product listing) | Price | Why it is here |
|---|---|---|---|
| 92 Drag Star Bracket Rac er Gloss Black 15x8 | 15 x 8 in, 5.250 in backspace, 5 x 4.50 in bolt pattern, aluminum, black paint (per listing; the title states none of these, the spec line states all of them) | $245.48 | The floor of this page and its value pick: Race Star’s 92 Drag Star Bracket Racer is the only wheel here under $300, in gloss black, sized as a rear for a Ford-pattern car. |
| 17x5.0 D5 Drag Wheel 5x4.5 BC 2.125 BS | D5 Drag Wheel, 17 x 5 in, 2.125 in backspace, 5 x 4.50 in bolt pattern, aluminum, black powder coat center, machined lip (per listing) | $340.00 | The modern front runner: Forgestar’s D5 puts the skinny front wheel on a 17 in diameter for cars whose brakes outgrew 15 in fronts, in the same 5 x 4.50 pattern as the classic rears below. |
| 15 X 3.5in. Draglite 5 X 4.5-4.75in. 1.375in. BS | Draglite, 15 x 3.5 in, 1.375 in backspace, dual 5 x 4.50 / 5 x 4.75 in bolt pattern, aluminum, polished (per listing) | $395.00 | The classic front runner: WELD’s Draglite in the narrow 3.5 in width, drilled for both common 5-lug patterns on one wheel - the dual drilling is printed in its own listing, not assumed. |
| 17x10 Ventura Drag Wheel 5x114.3 BC 7.42 BS | Ventura Drag, 17 x 10 in, 7.420 in backspace, titled 5x114.3 and specced 5 x 4.50 in - the same pattern in metric and imperial (per listing) | $478.68 | The modern rear: a 17 x 10 with the deep 7.42 in backspace late-model cars need to tuck a wide tire, and the page’s clearest lesson in pattern naming - 114.3 mm and 4.50 in are one pattern, stated both ways by its own listing. |
| V-Series Frnt Drag Wheel Blk 15x3.5 5x4.75BC 1.75 | V-Series Frontrunner, 15 x 3.5 in, 1.750 in backspace, 5 x 4.75 in bolt pattern, aluminum, black anodized / machined (per listing) | $906.19 | The ceiling of this page: WELD’s V-Series frontrunner, listed under that name by the maker, in black anodized and machined finish - the dedicated race front wheel the classic Draglite and Pro Star fronts sit below. |
STEP ONE: 15 IN FRONT RUNNERS
The narrow end of a drag setup: five 15 in fronts, 3.5 to 4 in wide, all aluminum. WELD’s Draglite 15 x 3.5 is dual-drilled 5 x 4.50 / 5 x 4.75 in with 1.375 in backspace, polished ($395.00) - one wheel covering both the Ford and GM 5-lug patterns. The Pro Star fronts split the patterns instead: 5 x 4.50 in, 1.375 in backspace at 3.5 in wide ($395.00) and 5 x 4.75 in, 1.875 in backspace at 4 in wide ($399.00), both polished. At the top of the shelf sit the two dedicated frontrunners, each listed under that name: WELD’s V-Series Frontrunner, 15 x 3.5, 5 x 4.75 in, 1.750 in backspace, black anodized / machined ($906.19) and its Aluma Star frontrunner, 15 x 3.5, 5 x 4.50 in, 2.250 in backspace, black anodized ($906.19). Questions before you order? Call 213-549-4279 (Mon-Fri, 9am-5pm PT) and we will read the listing with you.
STEP TWO: CLASSIC 15 IN REARS - 8, 10 AND 12 IN WIDE
Six rears in the classic sizes, and the backspace ladder is the story: the same wheel family changes backspace as it gets wider, which is what lets a tire grow without moving the hub. Race Star’s 92 Drag Star Bracket Racer, 15 x 8, gloss black ($245.48) is listed for Ford fitment with 5 x 4.50 in pattern and 5.250 in backspace in its spec line - its title states neither figure, so both are printed here from the listing body, not the name. WELD’s 15 x 8 pair: the Draglite, dual 5 x 4.50 / 5 x 4.75 in, 4.500 in backspace ($399.00) and the Pro Star, 5 x 4.50 in, 4.500 in backspace ($399.00), both polished aluminum. At 10 in wide: the Draglite, dual pattern, 5.500 in backspace ($465.00) and the Pro Star, 5 x 4.75 in, 4.500 in backspace ($465.00). Widest here: the Draglite 15 x 12, dual pattern, 7.500 in backspace ($508.29) - note how the backspace, not just the width, grew: a 12 in wheel on a 4.5 in backspace would push most of that width outboard of the hub face.
STEP THREE: BILLET SPECIALTIES - STREET LITE AND WIN LITE
Four billet wheels, every one listed as aluminum with a polished / machined center and polished lip unless it is the black version. Fronts: the Street Lite 15 x 3.5, 5 x 4.50 in, 1.750 in backspace ($613.00) and the Win Lite Black 15 x 4, 2.250 in backspace ($613.00) - the Win Lite’s title states no pattern, and its listing body states 5 x 4.50 in, black anodized / machined center, which is where those figures come from. Rears: the Street Lite 15 x 10, 5 x 4.75 in, 5.500 in backspace ($633.00) and the Street Lite 15 x 12, 5 x 4.75 in, 4.500 in backspace ($671.00) - a useful contrast with the Draglite 12 in above: same width and pattern family, 3 in less backspace, so the two wheels place the same tire in very different spots in the wheelwell.
STEP FOUR: MODERN 17 AND 18 IN DRAG WHEELS
Late-model cars often cannot run a 15 in front over their brakes, so the drag pack moved up in diameter - and the patterns went metric in the titles. Fronts: Forgestar’s D5, 17 x 5, 5 x 4.50 in, 2.125 in backspace, black powder coat center, machined lip ($340.00), its F14, 17 x 4.5, 5 x 4.75 in, 1.750 in backspace, matte black powder coat ($340.00), and the D5 in 18 x 5, 5 x 120 mm, 2.125 in backspace ($370.00). Rears: Race Star’s 92 Drag Star Bracket Racer, 17 x 10.5, gloss black ($355.98), listed for Ford fitment at 5 x 4.50 in and 7.625 in backspace in its spec line; Forgestar’s D5, 17 x 10, 5 x 115 mm, 6.600 in backspace ($415.00) and D5, 18 x 10, 5 x 4.50 in, 7.100 in backspace ($440.00); and WELD’s Ventura Drag, 17 x 10, 7.420 in backspace, black paint / machined ($478.68), titled 5x114.3 and specced 5 x 4.50 in - the same pattern in millimetres and inches. Read the metric patterns carefully: 5 x 115 mm and 5 x 120 mm are their own patterns, not rounded versions of 5 x 4.50, and a wheel in one does not bolt to a hub in the other.
STEP FIVE: THE 6-LUG TRUCK PAIR, AND THE PAGE’S ONE BEADLOCK
Two 17 x 10 rears carry the 6 x 135 mm truck pattern, both WELD Solana designs at 7.150 in backspace, aluminum, black paint / machined center, machined lip: the standard Solana Drag ($478.68) and the Solana Beadlock ($876.73), whose listing states Beadlock in its spec line and a black paint lip. A beadlock clamps the tire bead to the wheel with a bolted ring instead of relying on air pressure and the bead seat alone - it is the one wheel here built that way, and the other 23 are conventional bead-seat wheels, stated plainly so nobody orders the standard Solana expecting the ring. Whether a beadlock is required, allowed or street-legal for your class and use is your sanctioning body’s and the maker’s call, not this page’s - no listing here states a certification for it, so none is claimed.
AN HONEST NOTE ON WHAT IS NOT ON THIS PAGE
The parent Wheels range holds 1,119 products, and most of them are not drag wheels. Excluded: the wheel halves, centers and shells (WELD, Keizer and others sell the components of multi-piece and sprint wheels separately - a half is not a wheel, and none is listed here as one); the circle-track steel wheels (the Aero Race Wheels and Bassett shelves, including their IMCA beadlocks - a different discipline with its own width and backspace conventions); sprint, Wide 5 and direct-mount wheels; kart and mini wheels (the Van-K shelf); street and rally wheels; and the spindle-mount fronts (Strange and Anglia mount V-Series and Aluma Star wheels exist in the wider range - they bolt to a spindle, not a hub, and belong in their own conversation). The wider range also carries more sizes of every family shown here, plus near-duplicate Forgestar listings under second handles, which were left out so each size appears once. Also named plainly: no listing on this page publishes a load rating, a weight for the wheel itself as a buying spec, or an SFI or DOT certification - the weights in the listings are shipping weights - so none of those figures is printed here.
QUESTIONS BUYERS ASK US
How do I measure my bolt pattern? Count the lugs first - everything on this page is 5-lug except the 6 x 135 mm truck pair. For a 5-lug hub, the pattern is the diameter of the circle through the stud centers, most easily checked by measuring from the center of one stud to the far edge of the stud two positions away, or with a bolt-pattern gauge. The two classic results are 5 x 4.50 in (the Ford pattern) and 5 x 4.75 in (the GM pattern) - close enough to look alike on a tape, different enough that a wheel drilled for one does not seat on the other, which is exactly why the dual-drilled Draglites exist.
Backspacing or offset - which number am I shopping? Every listing on this page states backspacing: the distance from the wheel’s mounting face to its inner lip. More backspace tucks the wheel and tire further inboard; less pushes them outboard. It is the number that decides clearance to springs, shocks and frame rails on the inside and to the fender lip on the outside, and it is why the 15 x 12 Draglite above carries 7.5 in of it while the 15 x 12 Street Lite carries 4.5 in - same width, different placement. Measure your wheelwell before choosing, not after.
Is 5x114.3 the same as 5x4.5? Yes - 114.3 mm is 4.50 in, and the Ventura Drag’s own listing states the pattern both ways. The trap is the near neighbours: 5 x 115 mm and 5 x 120 mm, both on this page in Forgestar D5 sizes, are different patterns that differ from 114.3 by less than a millimetre and 6 mm respectively. Close is not interchangeable - a wheel that almost seats will fret its studs and seats. Order the pattern your hub actually measures.
What does dual bolt pattern mean on the Draglites? The wheel is drilled with two 5-lug patterns - 5 x 4.50 and 5 x 4.75 in - on the same center, as the Draglite listings state. It bolts correctly to either hub, which is why those wheels show both figures everywhere the single-pattern Pro Stars show one. It does not mean the wheel fits 4-lug hubs, 6-lug hubs, or the metric patterns in Step Four.
How wide a rear wheel do I need? The tire decides, and the wheelwell vetoes. This page runs rears from 8 in (bracket and street/strip sizes) through 10 and 10.5 in to 12 in, and the backspace figures climb with the width on the WELD shelf. Match the wheel width to the tire maker’s approved rim-width range for the slick or radial you run, then check that the backspace on offer places that package between your frame rail and fender lip with room for tire growth and body roll - a tape measure across the well at ride height answers more than any chart.
Do I need beadlocks? Only one wheel here is a beadlock - the Solana Beadlock in Step Five - and its job is to clamp the bead mechanically on a high-power, low-pressure launch. Most combinations on this page run conventional bead seats, as most bracket and street/strip cars do. Whether your class requires, allows or forbids a beadlock, and whether one may be driven on the street, is set by your sanctioning body and local law and the maker’s instructions - no listing here certifies any of that, so confirm it there before ordering the ring version.
Shopping the wider range? Browse the full Wheels collection, read our guides on the News & Builds blog, or see the page that came before this one: AN Hose Ends & Braided Hose by AN Size.