Performance Intake Manifolds by Engine & RPM Range
An intake manifold is bought engine first, then by induction, then by design: engine family and head port shape decide what bolts on, carburetor or EFI decides the flange, and dual plane or single plane decides where the design is aimed — dual planes split the plenum for street torque, single planes open it up for higher-rpm work. This page sorts 24 in-stock intake manifolds from $160.94 to $1,699.95 that way: small- and big-block Chevy, LS in carb and EFI form, small-block Ford, Mopar small- and big-block, Pontiac, big-block Ford, Coyote and Gen V LT. One honesty note that shapes the whole page: no manifold listing in our catalog states a numeric RPM operating range, so no RPM figure is printed for any product here. Where a name carries the word RPM — Edelbrock’s Performer RPM family — that is the maker’s family name for its higher-rpm street designs, not a measured range from the listing, and this page treats it exactly that way. Every flange, plane, port and material below comes from that manifold’s own listing. Every order over $200 ships free.
OUR INTAKE MANIFOLD PICKS
| Product | Spec (from the product listing) | Price | Why it is here |
|---|---|---|---|
| SBC Vortec Street Warrior Intake Manifold | Weiand Street Warrior, SBC Vortec, square bore, dual plane, aluminum | $160.94 | The floor of this page: a Vortec-head small-block dual plane for under $165. Vortec heads take their own manifold pattern, and this is the cheapest correct-pattern entry here. |
| SBC Performer RPM Manifold - 262-400 | Edelbrock Performer RPM (7101), SBC 262-400, square bore, dual plane, aluminum | $329.95 | The mainstream street pick and the deepest-stocked manifold on this page: Edelbrock’s higher-rpm dual-plane family for the classic small-block Chevy, at the middle of the ladder. |
| BBC Performer RPM A/G Manifold- R/P - 396-502 | Edelbrock RPM Air-Gap 2-R (7562), BBC 396-502, square bore, dual plane, rectangle port, aluminum | $487.95 | The big-block pick, and a port lesson in one part: this Air-Gap is the rectangle-port version — the oval-port 2-O sits next to it on this page, and the two are not interchangeable. |
| GM LS Intake Manifold - LSXR 102mm LS1/LS2/LS6 | FAST LSXR 102mm, LS1/LS2/LS6, throttle body flange, multi port, cathedral port, polymer, black | $1,288.18 | The cathedral-port EFI pick: a 102mm multi-port polymer manifold for the early LS engines — bought by port shape and throttle-body size, not by plane. |
| Atomic AirForce LT1 Intake Manifold | MSD Atomic AirForce (2700), GM Gen V LT, throttle body flange, multi port, polymer, black | $1,699.95 | The ceiling of this page: the Gen V LT entry, and the only manifold here over $1,300 — modern direct-injection-era engines shop a different shelf from the carb manifolds below. |
SMALL-BLOCK CHEVY, DUAL PLANE: THE STREET SHELF
Four dual planes for the 262-400 small-block, and the ladder is the lesson. The floor is a head-pattern warning: Weiand’s SBC Vortec Street Warrior ($160.94) is a square-bore dual plane listed for Vortec heads — Vortec small-blocks take a different manifold bolt pattern from the classic heads, so a cheap manifold for the wrong heads is no bargain. The classic-head steps: Edelbrock’s Performer EPS ($245.95), the entry Performer-family dual plane; the Performer RPM ($329.95), the deepest-stocked manifold on this page and the family’s higher-rpm street step; and the Performer RPM Air-Gap ($399.95), whose runners are raised off the valley so the charge runs cooler — that is the Air-Gap design definition, and no power figure is attached to it here because no listing states one. Questions before you order? Call 213-549-4279 (Mon-Fri, 9am-5pm PT) and we will read the listing with you.
SMALL-BLOCK CHEVY, SINGLE PLANE: THE HIGHER-RPM SHELF
Three single planes, one open plenum each. Edelbrock’s Torker II ($291.82) is the low-profile single plane of the three. The Victor Jr. ($427.95) is listed for 302-400 c.i.d. and 23-degree heads — note its fitment line starts at 302, not 262, so the smallest small-blocks are outside its stated range. The Super Victor ($474.95) is also a 23-degree, 302-400 listing and sits at the top of the family. The trade is definitional and every builder guide states it the same way: a single plane gives up some low- and mid-range response for an open plenum that suits higher-rpm use, so the honest question is where your engine actually runs — cam, gearing and use decide, not the dyno peak.
BIG-BLOCK CHEVY: PORT SHAPE DECIDES FIRST
Three manifolds for 396-502 big-blocks, split by the port in the head. The dual planes: the Performer RPM 2-O ($419.95), oval port, and the RPM Air-Gap 2-R ($487.95), rectangle port — same family, same displacement range, different head port, and not interchangeable. The single plane: the Victor Jr. 454-O ($489.95), oval port. Read your head casting before you read prices: oval and rectangle port big-block heads are both common, and the manifold has to match the port you own.
LS: CARB CONVERSIONS AND EFI, CATHEDRAL AND RECTANGLE
Four LS manifolds, two induction worlds. The carb pair, both square bore: the LS1 Performer RPM ($410.80), a dual plane for cathedral port heads, and the LS Victor Jr. 4150 flange ($476.95), a single plane whose own spec line names L76 / L92 / LS3 — the rectangle-port engines. The EFI pair, both multi-port with throttle-body flanges: FAST’s LSXR 102mm ($1,288.18), cathedral port, polymer, for LS1/LS2/LS6; and Holley’s Hi-Ram system ($1,299.95), a 105mm kit for LS3 / L92 rectangle-port engines in black ceramic. Cathedral and rectangle are head shapes, not trim levels — the LS section of any catalog splits on them, and so does this page. Note the EFI manifolds are sold as manifolds/kits per their listings; injectors and throttle body are separate decisions unless a listing says otherwise.
SMALL-BLOCK FORD: 260-302, THREE STEPS
Three Edelbrock manifolds for the small-block Ford, in the same family steps as the Chevy shelf: the Performer RPM 260-302 dual plane ($369.95), the Performer RPM Air-Gap 289-302 dual plane ($449.95), and the Victor Jr. 289-302 single plane ($474.95). One flag, printed exactly as found: the Victor Jr.’s own fitment line reads “Universal fit — this is not a vehicle-specific part,” against its 289-302 title — its spec line (Victor JR. 302, square bore, single plane) is what this page relies on, and a call before ordering that one is a good idea. The 351W takes its own manifolds — deck height differs — and the wider range carries them separately.
MOPAR, PONTIAC AND BIG-BLOCK FORD
Five dual planes beyond the Chevy/Ford small-block core. Small-block Mopar: Professional Products’ Crosswind in satin ($176.99), the value entry of this section, and Edelbrock’s Performer RPM Air-Gap 340-360 ($469.95). Big-block Mopar: the Performer RPM 440 ($379.95) — one flag: its title says Performer RPM while its own spec line reads “Performer 440” for the Mopar RB-Series; both are printed here rather than smoothed over. Pontiac: the Performer RPM 326-455 ($457.95), spread / square bore. Big-block Ford: the Performer RPM 429-460 ($476.95), also spread / square bore — the two spread-bore listings on this page, for engines whose original carburetors were spread-bore pattern.
MODERN EFI: COYOTE AND GEN V LT
Two manifolds for the current engines, both multi-port EFI and neither bought by plane. Holley’s Ultra Lo-Ram kit for Ford Coyote ($486.24) states a 93mm throttle-body flange — the Lo-Ram name is the listing’s own, and low height is the point of the design where hood room is tight, though no clearance figure is stated and none is promised here. MSD’s Atomic AirForce for GM Gen V LT ($1,699.95) is polymer, black, and the top of this page’s ladder. On modern engines the manifold decision runs through the maker’s application guide for your exact engine variant — every listing here says so, and this page repeats it rather than inventing year breaks.
AN HONEST NOTE ON WHAT IS NOT ON THIS PAGE
The parent Intake Manifolds range holds 459 products, 378 of them in stock, and most are not on this page. Excluded: install kits (Edelbrock sells Performer and Air-Gap manifolds bundled with gaskets/hardware as install kits — real products, but a kit is not a manifold choice); duplicate and finish variants of manifolds already here (the same casting in black or polished, and near-identical duplicate listings — the SBC Super Victor 4500 and the Holley 351W Hi-Ram each appear more than once in the wider range); dual-quad, tunnel ram and blower manifolds (a different induction decision, carried in the wider range); manifold bases, upper plenums and EGR components that share the parent range with complete manifolds — every product here is a complete manifold per its listing; and the wider range’s 351W, 351C, BBC 4500-flange, Hemi and AMC shelves, left out so each engine family here keeps one clear ladder. Also named plainly: many Edelbrock listings here carry the maker’s California notice — not legal for sale or use in California on pollution-controlled motor vehicles — printed on their own pages; check yours before ordering for a street car.
QUESTIONS BUYERS ASK US
Dual plane or single plane? It is the first design question in this category, and the trade is definitional: a dual plane splits the plenum into two smaller plenums with longer runners, which suits street and mid-range use; a single plane opens one common plenum with shorter, more direct runners, which suits higher-rpm use and gives up some low-end response. Match the design to where the engine actually runs — cam, gearing and how the car is used — not to the biggest peak number. This page carries both for the small-block Chevy and Ford so the choice is visible in one place.
What RPM range is each manifold good for? Honestly: the listings in our catalog do not state one. No product on this page publishes a numeric operating RPM range in its listing, so none is printed — the RPM in Performer RPM is Edelbrock’s family name for its higher-rpm street line, sitting above the Performer family and below the Victor race family, and that family order is the guidance the listings themselves support. For a numeric range for a specific part number, the maker’s own page for that part is the source, and we will read it with you on the phone.
Will it fit my heads? Port shape and head pattern decide, and they are stated per manifold: cathedral vs rectangle port on LS, oval vs rectangle port on big-block Chevy, Vortec vs classic pattern on small-block Chevy, and displacement ranges that sometimes start mid-family — the SBC Victor Jr. here is listed from 302 c.i.d., not 262. Check your head casting and the fitment line of the manifold you are looking at; if the two do not clearly agree, call us before ordering.
Square bore or spread bore? That is your carburetor’s flange pattern. Most manifolds here are square bore; the two spread / square bore listings (Pontiac and big-block Ford Performer RPM) accept the spread-bore pattern those engines originally used. On EFI manifolds the equivalent question is throttle-body size and flange — stated per listing here as 102mm, 105mm and 93mm on the FAST, Holley and Coyote picks.
Will it clear my hood? No listing on this page states a manifold height or a hood-clearance promise, so none is made here. Taller designs, spacers, the carburetor or throttle body and the air cleaner all stack above the manifold — measure your car, and treat any manifold swap on a closed-hood street car as a measure-first job.
What else do I need? Read the listing’s own included line: the manifolds here are sold as manifolds (the Holley LS3 Hi-Ram and Coyote Lo-Ram are listed as kits/systems, as their titles say), and gaskets, hardware, fuel rails, injectors and throttle bodies are included only where a listing states them. Edelbrock’s separate install kits exist in the wider range for exactly that reason. Professional installation is recommended on the listings themselves, and this page repeats it.
Shopping the wider range? Browse the full Intake Manifolds collection, read our guides on the News & Builds blog, or see the page that came before this one: Electric Cooling Fans by Diameter & CFM.